A-1325 Product Description
A-1325: Concrete Satin Finish Acrylic Sealer. A-1325 is a premium quality crystal clear acrylic urethane that provides a tough, durable surface.
Advantages
- Abrasion-resistant
- Chemical resistant
- Stain Resistant
- Non Yellowing
- Repels oil, grease & water
Uses
- Interior or exterior surfaces
- Concrete Floors
- Walkways
- Patios
- Pools
- Pavers
- Brick Walls
- Wood Finish
Package Size
Surface Preparation
- Clean the floors to be coated by removing any oil, grease, or other contaminants that might interfere with the proper adhesion of the A-1325 Acrylic Urethane. Ensure that floors are structurally sound and fully cured a minimum of 28 days.
- Test the floor for vapor drive in accordance with ASTM D4263. Mechanical profiling is the preferred floor-preparation method.
- Mechanically profile the floor to a medium-grit sandpaper texture and remove curing and parting compounds and other surface hardeners and floor coatings.
- Acid may be used to etch bare concrete floors to the proper profile when mechanical abrasion is impractical. Make sure the surface is thoroughly clean before etching.
- Etch all unpainted cement with 1 part 10% muriatic acid to 1 part water.
- Allow standing 10-15 minutes then rinse clean with water.
- After etching, neutralize the acid with baking soda or soda ash then rinse thoroughly with water. A properly etched concrete surface should resemble the texture of fine or medium sandpaper.
- Let dry thoroughly before applying the coating.
