now is modern browser
Proudly Made in the USA, Trusted Worldwide
High Performance Stains, Sealers and Top Coats
Technical Support

CLOSE

A-16,000 Concrete Deck System
A-16,000 Concrete Deck System
1/ 1
Home / NEW PRODUCT / A-16,000 Concrete Deck System

A-16,000 Concrete Deck System

Type
A-300，
A-800，
A-900，
A-1100，
A-1150，
A-8,100

A-16,000 Deck System

A-16,000 waterproofing system is designed as a durable yet flexible system over concrete or magnesite. The system creates a flexible, durable, and waterproof finish. The finish can incorporate many different colors, designs, and patterns.

A-16,000 System Components

  • A-300: Concrete Bonder Admix
  • A-800: Texture Finish
  • A-900: Waterproofing Basecoat
  • A-1100: Acrylic Pigmented Sealer
  • A-1150: Acrylic Concrete/Masonry Pigmented Sealer
  • A-8100: Waterproofing Bonder

A-16,000 Specification

A-900 Product Description

A-900 Waterproofing Basecoat is a powdered proprietary co-polymer that is mixed with cement and sand to achieve the highest in quality for waterproofing plywood decking.  It has larger sand than all of the other Americrete products and can be used in virtually any climate due to its ability to resist freeze/thaw cycles.  When going over concrete or doing build-ups with this product, add 1-gallon Concrete Bonder A-300 to this product. See specification A-9000.

Coverage Rate

  • Waterproofing Basecoat will receive approximately 35-40 square feet per bag, depending upon the application.

Primary Uses, Characteristics, and Advantages

  • This product eliminates concrete removal and is a single component mix by just adding water. 
  • Waterproofing Basecoat has superior bonding capabilities, is weather resistant, and flexible. 
  • This product is water resistant, chemical resistant, and non-re-emulsifiable.
  • Waterproofing Basecoat can be applied on interior and exterior applications. 
  • Waterproofing Basecoat is freeze/thaw resistant. 
  • This product is environmentally friendly.

Application

  • This product eliminates concrete removal and is a single component mix by just adding water. 
  • Waterproofing Basecoat has superior bonding capabilities, is weather resistant, and flexible. 
  • This product is water resistant, chemical resistant, and non-re-emulsifiable.
  • Waterproofing Basecoat can be applied on interior and exterior applications. 
  • Waterproofing Basecoat is freeze/thaw resistant. 
  • This product is environmentally friendly. See Specification A-9,000.

A-300

A-300 Product Description

A-300 Americrete Concrete Bonder Admix is a proprietary bonding agent and Portland Cement admixture. Concrete Bonder Admix provides superior adhesion and flexibility, allowing the user to apply materials at any depth or thickness. Concrete Bonder Admix bonds to virtually any type of surface. A primer coat may be required.

Characteristics

  • Environmentally safe, non-re-emulsifiable, waterborne proprietary copolymer. 
  • Superior adhesive and co-adhesive bonding strength. 
  • Reduces moisture vapor emission through slabs. 
  • Concrete Bonder Admix is a multi-purpose product that will create a permanent bond between sound substrates and Portland cement based underlayments. 
  • Protect Concrete Bonder Admix from freezing until use.

Coverage Rate

  • A-300 will achieve approximately 300 – 350 square feet per gallon of primer.
  • One gallon of A-300 should be used per every 50 lbs of concrete.

Uses and General Information

  • Should be used over A-700 Stamp when using water-based stain, concrete patching and repair, spalled/deteriorated conditions, horizontal concrete/asphalt renovation, pedestrian and traffic surfaces, renovation of Gypsum underlayments, slip/abrasion resistant surfaces, reduction of moisture vapor emissions, asbestos tile encapsulation, recreational surfaces (repair and smoothing), highways, bridges, sidewalks, curbs, waterproofing, parking structures, warehouses, pool decks, driveways, loading docks and ramps and masonry walls.

A-800

A-800 Product Description

A-800 Texture Finish is a proprietary mixture of copolymer resins mixed with variously sized aggregates.  Texture Finish is designed to be applied with a hopper gun to achieve a spray texture finish and knocked down with a trowel, or it can be left free standing.  Texture Finish can be applied over any concrete substrate. Ideal for pool decks due to the knockdown texture (anti-skid capabilities), and is an approved finish over Americrete Waterproofing Base Coat lath System A-9000. 

Coverage Rate

  • Texture Finish will cover 125 to 150 square feet per bag, depending upon the application procedure followed.

Primary Uses, Characteristics and Advantages

  • This product eliminates concrete removal and is a single component mix by just adding water. 
  • Texture Finish has superior bonding capabilities and is weather resistant. 
  • This product is water resistant, chemical resistant, and non-re-emulsifiable. 
  • Texture Finish can be applied on interior and exterior applications. 
  • This product is environmentally friendly.

Application

  1. Mix one bag of A-800 Texture to 5 quarts of water. 
  2. Put into a hopper gun at a low pressure and apply to surface. 
  3. Let stand and knock down with a trowel. 
  4. Then apply two coats of A-1100, A-1475 or A-4100.  
  5. See Americrete’s Specification A-8,000 Pool Texture Finish System for complete installation instructions.

A-1100

A-1100 Product Description

A-1100 is a Premium, Quick Drying, 100% Acrylic Pigmented Sealer formulated for sealing concrete and wood to provide resistance against water, alkalis, acids, ultra-violet light, and staining.

Advantages

  • UV Resistant
  • Fast Drying
  • Water Base- Easy Clean-Up
  • Chemical Resistant
  • Alkali and Moisture Resistant
  • Excellent Hide and Color Retention
  • Passes ASTM D2047-82
  • Resistant to Ponding Water

Uses

  • Concrete Floors
  • Pool Decks
  • Patios
  • Fiberglass Mess System
  • Armor shield (Acrylic/Lath) Deck System
  • Pool Texture Deck System
  • Wood decks and walkways
  • Stucco
  • Finish: Satin Sheen

Surface Preparation

  1. For maximum durability, the surface must be clean, free of dirt, oil, chalk and other foreign matter.
  2. Concrete, concrete decks, concrete floors and concrete walkways
  3. New concrete must age for a minimum of 30 days. Cool temperatures and high humidity may require a longer cure time. Remove all grease, oil, and wax with T.S.P. solution. (One pound of T.S.P. to 1 gallon of water.)
  4. Scrub with a stiff broom until the surface is thoroughly clean. Rinse thoroughly with clear water. 
  5. Then etch all unpainted cement with A-250 acid etching gel, let stand five minutes then rinse clean with water. 
  6. After etching, neutralize the acid with baking soda or soda ash then rinse thoroughly with water.
  7. A properly etched concrete surface should resemble the texture of medium sandpaper. Let dry thoroughly before applying the coating.

Priming

  • A-1100 may be used as its own primer. 
  • To use as a primer, add 1-pint water to 1 gallon A-1100. 

Previously Painted Surfaces

  • Clean all surfaces and roughen all glossy surfaces by sanding. 
  • Remove all peeling, loose or blistered paint by scraping and wire brushing. 
  • Remove all chlorinated rubber and hydrocarbon finishes by sandblasting. 
  • Clean all surfaces thoroughly with a T.S.P solution and then rinse thoroughly with water.

Glossy Surfaces

  • Roughen gloss by sanding; then wash with a T.S.P. solution and rinse thoroughly with water.

Coverage

  • A-1100 may be rolled, brushed or sprayed. 
  • The coverage will vary, up to 300 square feet per gallon on a smooth surface and between 100-250 square feet per gallon on a rough or textured surface.  (Product may be thinned with a small amount of water, 2 coats are recommended.)

Application

  1. Box and mix all containers together to ensure consistent color. 
  2. Neatly cut-in all edges with a brush and roll the main area using a 1/2″ nap, good quality roller cover. 
  3. Be sure to spread evenly in a “V” pattern, rolling in both directions. It is best not to apply in the hot sun or above 80 degrees. 
  4. Thinning slightly with water and applying thin coats will help avoid streaks in direct sun.

Drying Time

  1. Allow four (4) hours between coats and light foot traffic. 
  2. Normal foot traffic after twenty-four (24) hours. No vehicle traffic without sealer.  
  3. Allow forty-eight (48) hours before placing heavy objects on the surface.

Clean-up

  • Warm water and soap.
  • Temperature/Weather
  • Do not install any Americrete product if the temperature is below 55 degrees or in extreme heat.
  • Rain may damage uncured Americrete products.  If inclement weather threatens, cover deck to protect the new application.  Do not allow any Americrete product to FREEZE.

Maintenance

  • Most Stains will clean-up with T.S.P, a brush, and water. We recommend a re-coat every 3-5 years. 

A-1150

A-1150 Product Description

Americrete “A-1150” Series is a Premium, Quick Drying, 100% Acrylic Concrete/Masonry Pigmented Sealer. Formulated to reflect infrared rays and to seal concrete and masonry resistance to water, alkalis, acids, ultra-violet light.

Advantages

  • Solar Heat Reflective
  • UV Resistant
  • Fast Drying
  • Water Base-Easy Clean-Up
  • Chemical Resistant
  • Alkali and Moisture Resistant
  • Excellent Hide and Color Retention
  • Passes ASTM D2047-82
  • Resistant to Ponding Water

Uses

  • Concrete Floors
  • Pool Decks

Patios

  • Fiberglass Mess System
  • Armor shield (Acrylic/Lath) Deck System
  • Pool Texture Deck System
  • Walls
  • Stucco
  • Finish:  Satin Sheen

Surface Preparation

  • For maximum durability, the surface must be clean, free of dirt, oil, chalk and other foreign matter.
  • For new concrete must age for a minimum of 30 days.
  • Cool temperatures and high humidity may require a longer cure time.
  • Remove all grease, oil, and wax with T.S.P. solution. (One pound of T.S.P. to 1 gallon of water.) Scrub with the stiff broom until the surface is thoroughly clean. 
  • Rinse thoroughly with clear water. 
  • Then etch all unpainted cement with a-250 Acid etching get, allow to stand five minutes then rinse clean with water.  After etching, neutralize the acid with baking soda or soda ash then rinse thoroughly with water. A properly etched concrete surface should resemble the texture of medium sandpaper.  Let dry thoroughly before applying the coating.

Priming

  • A-1150 Series may be used as its own primer. 
  • To use as a primer, add 1-pint water to 1 gallon A-1150 Series. 

Previously Painted Surfaces

  1. Clean all surfaces and roughen all glossy surfaces by sanding. 
  2. Remove all peeling, loose or blistered paint by scraping and wire brushing. 
  3. Remove all chlorinated rubber and hydrocarbon finishes by sandblasting. 
  4. Clean all surfaces thoroughly with a T.S.P solution and then rinse thoroughly with water.

Glossy Surfaces

  • Roughen gloss by sanding; then wash with a T.S.P. solution and rinse thoroughly with water.

Coverage

  • Cool Pool A-1150 Series may be rolled, brushed or sprayed. 
  • The coverage will vary, up to 300 square feet per gallon on a smooth surface and between 100-250 square feet per gallon on a rough or textured surface. (Product may be thinned with a small amount of water, 2 coats are recommended.)

Application

  1. Box and mix all containers together to ensure consistent color. 
  2. Neatly cut-in all edges with a brush and roll the main area using a 1/2″ nap, good quality roller cover. 
  3. Be sure to spread evenly in a “V” pattern, rolling in both directions.  
  4. It is best not to apply in the hot sun or above 80 degrees. 
  5. Thinning slightly with water and applying thin coats will help avoid streaks in direct sun.

Drying Time

  1. Allow four (4) hours between coats and light foot traffic. 
  2. Normal foot traffic after twenty-four (24) hours.
  3. No vehicle traffic without sealer.  
  4. Allow forty-eight (48) hours before placing heavy objects on the surface.

Clean-up

  • Warm water and soap.

Temperature/Weather

  • Do not install any Americrete product if the temperature is below 55 degrees or in extreme heat.
  • Rain may damage uncured Americrete products. 
  • If inclement weather threatens, cover deck to protect the new application. 
  • Do not allow any Americrete product to FREEZE.

Maintenance

  • Most Stains will clean-up with T.S.P, a brush, and water. 
  • We recommend a re-coat every 3-5 years, depending on traffic and exposure to the sun.

Other System Components

A-8,100

A-8,100 Product Description

A-8100 Waterproofing Bonder is a proprietary polymer designed to be used as a bonding and waterproofing agent over A-1600/A-1620/A-1625/A-1630 Flex Mesh in Americrete’s Metal Lath Waterproofing and Flex Coat system. See Manufacturer’s Specification A-9,000 and A-9,100, A-16,000 for complete installation procedures.

Primary Uses

  • A-8100 Waterproofing bonder can be used as a primer for cementitious overlays. 
  • It must be used with Americrete’s Waterproofing Systems when adhering the flex mesh to the A-900 Waterproofing Basecoat.

Characteristics

  • Environmentally safe, non-re-emulsifiable water borne proprietary copolymer. 
  • Superior adhesive and bonding strength provides waterproofing, flexibility and abrasion resistance.

Coverage Rate & Application

  • Americrete A-8100 Waterproofing bonder will achieve 200-250 square feet per gallon over Flex Mesh.
  • A-8100 is applied over Flex Mesh with a paint roller or a ¼” nap roller. You must let A-8100 dry completely before continuing.

  • A-16,000 Specification

  • A-300

  • A-800

  • A-1100

  • A-1150

  • Other System Components

  • A-8,100

A-900 Product Description

A-900 Waterproofing Basecoat is a powdered proprietary co-polymer that is mixed with cement and sand to achieve the highest in quality for waterproofing plywood decking.  It has larger sand than all of the other Americrete products and can be used in virtually any climate due to its ability to resist freeze/thaw cycles.  When going over concrete or doing build-ups with this product, add 1-gallon Concrete Bonder A-300 to this product. See specification A-9000.

Coverage Rate

  • Waterproofing Basecoat will receive approximately 35-40 square feet per bag, depending upon the application.

Primary Uses, Characteristics, and Advantages

  • This product eliminates concrete removal and is a single component mix by just adding water. 
  • Waterproofing Basecoat has superior bonding capabilities, is weather resistant, and flexible. 
  • This product is water resistant, chemical resistant, and non-re-emulsifiable.
  • Waterproofing Basecoat can be applied on interior and exterior applications. 
  • Waterproofing Basecoat is freeze/thaw resistant. 
  • This product is environmentally friendly.

Application

  • This product eliminates concrete removal and is a single component mix by just adding water. 
  • Waterproofing Basecoat has superior bonding capabilities, is weather resistant, and flexible. 
  • This product is water resistant, chemical resistant, and non-re-emulsifiable.
  • Waterproofing Basecoat can be applied on interior and exterior applications. 
  • Waterproofing Basecoat is freeze/thaw resistant. 
  • This product is environmentally friendly. See Specification A-9,000.

A-300 Product Description

A-300 Americrete Concrete Bonder Admix is a proprietary bonding agent and Portland Cement admixture. Concrete Bonder Admix provides superior adhesion and flexibility, allowing the user to apply materials at any depth or thickness. Concrete Bonder Admix bonds to virtually any type of surface. A primer coat may be required.

Characteristics

  • Environmentally safe, non-re-emulsifiable, waterborne proprietary copolymer. 
  • Superior adhesive and co-adhesive bonding strength. 
  • Reduces moisture vapor emission through slabs. 
  • Concrete Bonder Admix is a multi-purpose product that will create a permanent bond between sound substrates and Portland cement based underlayments. 
  • Protect Concrete Bonder Admix from freezing until use.

Coverage Rate

  • A-300 will achieve approximately 300 – 350 square feet per gallon of primer.
  • One gallon of A-300 should be used per every 50 lbs of concrete.

Uses and General Information

  • Should be used over A-700 Stamp when using water-based stain, concrete patching and repair, spalled/deteriorated conditions, horizontal concrete/asphalt renovation, pedestrian and traffic surfaces, renovation of Gypsum underlayments, slip/abrasion resistant surfaces, reduction of moisture vapor emissions, asbestos tile encapsulation, recreational surfaces (repair and smoothing), highways, bridges, sidewalks, curbs, waterproofing, parking structures, warehouses, pool decks, driveways, loading docks and ramps and masonry walls.

A-800 Product Description

A-800 Texture Finish is a proprietary mixture of copolymer resins mixed with variously sized aggregates.  Texture Finish is designed to be applied with a hopper gun to achieve a spray texture finish and knocked down with a trowel, or it can be left free standing.  Texture Finish can be applied over any concrete substrate. Ideal for pool decks due to the knockdown texture (anti-skid capabilities), and is an approved finish over Americrete Waterproofing Base Coat lath System A-9000. 

Coverage Rate

  • Texture Finish will cover 125 to 150 square feet per bag, depending upon the application procedure followed.

Primary Uses, Characteristics and Advantages

  • This product eliminates concrete removal and is a single component mix by just adding water. 
  • Texture Finish has superior bonding capabilities and is weather resistant. 
  • This product is water resistant, chemical resistant, and non-re-emulsifiable. 
  • Texture Finish can be applied on interior and exterior applications. 
  • This product is environmentally friendly.

Application

  1. Mix one bag of A-800 Texture to 5 quarts of water. 
  2. Put into a hopper gun at a low pressure and apply to surface. 
  3. Let stand and knock down with a trowel. 
  4. Then apply two coats of A-1100, A-1475 or A-4100.  
  5. See Americrete’s Specification A-8,000 Pool Texture Finish System for complete installation instructions.

A-1100 Product Description

A-1100 is a Premium, Quick Drying, 100% Acrylic Pigmented Sealer formulated for sealing concrete and wood to provide resistance against water, alkalis, acids, ultra-violet light, and staining.

Advantages

  • UV Resistant
  • Fast Drying
  • Water Base- Easy Clean-Up
  • Chemical Resistant
  • Alkali and Moisture Resistant
  • Excellent Hide and Color Retention
  • Passes ASTM D2047-82
  • Resistant to Ponding Water

Uses

  • Concrete Floors
  • Pool Decks
  • Patios
  • Fiberglass Mess System
  • Armor shield (Acrylic/Lath) Deck System
  • Pool Texture Deck System
  • Wood decks and walkways
  • Stucco
  • Finish: Satin Sheen

Surface Preparation

  1. For maximum durability, the surface must be clean, free of dirt, oil, chalk and other foreign matter.
  2. Concrete, concrete decks, concrete floors and concrete walkways
  3. New concrete must age for a minimum of 30 days. Cool temperatures and high humidity may require a longer cure time. Remove all grease, oil, and wax with T.S.P. solution. (One pound of T.S.P. to 1 gallon of water.)
  4. Scrub with a stiff broom until the surface is thoroughly clean. Rinse thoroughly with clear water. 
  5. Then etch all unpainted cement with A-250 acid etching gel, let stand five minutes then rinse clean with water. 
  6. After etching, neutralize the acid with baking soda or soda ash then rinse thoroughly with water.
  7. A properly etched concrete surface should resemble the texture of medium sandpaper. Let dry thoroughly before applying the coating.

Priming

  • A-1100 may be used as its own primer. 
  • To use as a primer, add 1-pint water to 1 gallon A-1100. 

Previously Painted Surfaces

  • Clean all surfaces and roughen all glossy surfaces by sanding. 
  • Remove all peeling, loose or blistered paint by scraping and wire brushing. 
  • Remove all chlorinated rubber and hydrocarbon finishes by sandblasting. 
  • Clean all surfaces thoroughly with a T.S.P solution and then rinse thoroughly with water.

Glossy Surfaces

  • Roughen gloss by sanding; then wash with a T.S.P. solution and rinse thoroughly with water.

Coverage

  • A-1100 may be rolled, brushed or sprayed. 
  • The coverage will vary, up to 300 square feet per gallon on a smooth surface and between 100-250 square feet per gallon on a rough or textured surface.  (Product may be thinned with a small amount of water, 2 coats are recommended.)

Application

  1. Box and mix all containers together to ensure consistent color. 
  2. Neatly cut-in all edges with a brush and roll the main area using a 1/2″ nap, good quality roller cover. 
  3. Be sure to spread evenly in a “V” pattern, rolling in both directions. It is best not to apply in the hot sun or above 80 degrees. 
  4. Thinning slightly with water and applying thin coats will help avoid streaks in direct sun.

Drying Time

  1. Allow four (4) hours between coats and light foot traffic. 
  2. Normal foot traffic after twenty-four (24) hours. No vehicle traffic without sealer.  
  3. Allow forty-eight (48) hours before placing heavy objects on the surface.

Clean-up

  • Warm water and soap.
  • Temperature/Weather
  • Do not install any Americrete product if the temperature is below 55 degrees or in extreme heat.
  • Rain may damage uncured Americrete products.  If inclement weather threatens, cover deck to protect the new application.  Do not allow any Americrete product to FREEZE.

Maintenance

  • Most Stains will clean-up with T.S.P, a brush, and water. We recommend a re-coat every 3-5 years. 

A-1150 Product Description

Americrete “A-1150” Series is a Premium, Quick Drying, 100% Acrylic Concrete/Masonry Pigmented Sealer. Formulated to reflect infrared rays and to seal concrete and masonry resistance to water, alkalis, acids, ultra-violet light.

Advantages

  • Solar Heat Reflective
  • UV Resistant
  • Fast Drying
  • Water Base-Easy Clean-Up
  • Chemical Resistant
  • Alkali and Moisture Resistant
  • Excellent Hide and Color Retention
  • Passes ASTM D2047-82
  • Resistant to Ponding Water

Uses

  • Concrete Floors
  • Pool Decks

Patios

  • Fiberglass Mess System
  • Armor shield (Acrylic/Lath) Deck System
  • Pool Texture Deck System
  • Walls
  • Stucco
  • Finish:  Satin Sheen

Surface Preparation

  • For maximum durability, the surface must be clean, free of dirt, oil, chalk and other foreign matter.
  • For new concrete must age for a minimum of 30 days.
  • Cool temperatures and high humidity may require a longer cure time.
  • Remove all grease, oil, and wax with T.S.P. solution. (One pound of T.S.P. to 1 gallon of water.) Scrub with the stiff broom until the surface is thoroughly clean. 
  • Rinse thoroughly with clear water. 
  • Then etch all unpainted cement with a-250 Acid etching get, allow to stand five minutes then rinse clean with water.  After etching, neutralize the acid with baking soda or soda ash then rinse thoroughly with water. A properly etched concrete surface should resemble the texture of medium sandpaper.  Let dry thoroughly before applying the coating.

Priming

  • A-1150 Series may be used as its own primer. 
  • To use as a primer, add 1-pint water to 1 gallon A-1150 Series. 

Previously Painted Surfaces

  1. Clean all surfaces and roughen all glossy surfaces by sanding. 
  2. Remove all peeling, loose or blistered paint by scraping and wire brushing. 
  3. Remove all chlorinated rubber and hydrocarbon finishes by sandblasting. 
  4. Clean all surfaces thoroughly with a T.S.P solution and then rinse thoroughly with water.

Glossy Surfaces

  • Roughen gloss by sanding; then wash with a T.S.P. solution and rinse thoroughly with water.

Coverage

  • Cool Pool A-1150 Series may be rolled, brushed or sprayed. 
  • The coverage will vary, up to 300 square feet per gallon on a smooth surface and between 100-250 square feet per gallon on a rough or textured surface. (Product may be thinned with a small amount of water, 2 coats are recommended.)

Application

  1. Box and mix all containers together to ensure consistent color. 
  2. Neatly cut-in all edges with a brush and roll the main area using a 1/2″ nap, good quality roller cover. 
  3. Be sure to spread evenly in a “V” pattern, rolling in both directions.  
  4. It is best not to apply in the hot sun or above 80 degrees. 
  5. Thinning slightly with water and applying thin coats will help avoid streaks in direct sun.

Drying Time

  1. Allow four (4) hours between coats and light foot traffic. 
  2. Normal foot traffic after twenty-four (24) hours.
  3. No vehicle traffic without sealer.  
  4. Allow forty-eight (48) hours before placing heavy objects on the surface.

Clean-up

  • Warm water and soap.

Temperature/Weather

  • Do not install any Americrete product if the temperature is below 55 degrees or in extreme heat.
  • Rain may damage uncured Americrete products. 
  • If inclement weather threatens, cover deck to protect the new application. 
  • Do not allow any Americrete product to FREEZE.

Maintenance

  • Most Stains will clean-up with T.S.P, a brush, and water. 
  • We recommend a re-coat every 3-5 years, depending on traffic and exposure to the sun.

A-8,100 Product Description

A-8100 Waterproofing Bonder is a proprietary polymer designed to be used as a bonding and waterproofing agent over A-1600/A-1620/A-1625/A-1630 Flex Mesh in Americrete’s Metal Lath Waterproofing and Flex Coat system. See Manufacturer’s Specification A-9,000 and A-9,100, A-16,000 for complete installation procedures.

Primary Uses

  • A-8100 Waterproofing bonder can be used as a primer for cementitious overlays. 
  • It must be used with Americrete’s Waterproofing Systems when adhering the flex mesh to the A-900 Waterproofing Basecoat.

Characteristics

  • Environmentally safe, non-re-emulsifiable water borne proprietary copolymer. 
  • Superior adhesive and bonding strength provides waterproofing, flexibility and abrasion resistance.

Coverage Rate & Application

  • Americrete A-8100 Waterproofing bonder will achieve 200-250 square feet per gallon over Flex Mesh.
  • A-8100 is applied over Flex Mesh with a paint roller or a ¼” nap roller. You must let A-8100 dry completely before continuing.