Cement Options

——————————Americrete Cement Options——————————

A-500 A-501 A-600 A-601 A-700 A-750 A-800 A-900

A-500 (Grey) Micro Finish For Interior/Exterior Use is designed to resurface concrete and as a smooth decorative finish. The A-500 can also be used to resurface and/or create beautiful countertop finishes. A-500 must be applied as a feather edge coating that can be applied at 1/64 inch. Can be applied by squeegee or trowel.

A-501 (White) Micro Finish For Interior/Exterior Use is designed to resurface concrete and as a smooth decorative finish. The A-500 can also be used to resurface and/or create beautiful countertop finishes. A-500 must be applied as a feather edge coating that can be applied at 1/64 inch. Can be applied by squeegee or trowel.

A-600 Americrete Grey Concrete Resurfacer is a powdered proprietary co-polymer mix that is easy to install for large projects or small repairs. This product only needs water added. Designed as a concrete surfacer to create smooth or textured surfacer over existing concrete. A-600 can be used with A-1000 stain or A-1100/A-1150 for coloring options.

A-601 (Grey) Americrete Concrete Resurfacer is a powdered proprietary co-polymer mix that is easy to install for large projects or small repairs. This product only needs water added. Designed as a concrete surfacer to create smooth or textured surfacer over existing concrete. A-600 can be used with A-1000 stain or A-1100/A-1150 for coloring options.

A-700 Stamp Crete is a proprietary mixture of specially modified acrylic copolymer resins mixed with variously sized aggregates. Stamp Crete is formulated to achieve 1/4 inch to 3/8 inch thickness profile that can be stamped using templates to achieve a simulated appearance of slate, brick, stone, or other designs. Stamp Crete is approved over Americrete waterproofing base coat.

A-750 Stamp Crete Primer is a powdered proprietary co-polymer mixture that is designed to be a primer for Stamp Crete A-700.

A-800 Texture Finish is a proprietary mixture of copolymer resins mixed with variously sized aggregates. Texture Finish is designed to be applied with a hopper gun to achieve a spray texture finish and knocked down with a trowel, or it can be left free standing. A-800 is designed to be applied over the A-600 or A-601 resurfacer. Ideal for pool decks due to the knockdown texture (anti-skid capabilities), and is an approved finish over Americrete Waterproofing Base Coat lath System A-9000.

A-900 Waterproofing Basecoat is a powdered proprietary co-polymer that is mixed with cement and sand to achieve the highest in quality for waterproofing plywood decking. See specification A-9000. It has larger sand than all of the other Americrete products and can be used in virtually any climate due to its ability to resist freeze/thaw cycles. When going over concrete or doing build-ups with this product, add 1-gallon Concrete Bonder A-300 to this product.